and the unofficial part 4: http://www.bbc.com/news/technology-29011895
I’ve bought one of these wonderful DIVMMC boards via eBay and though mine got squashed during delivery (not terminally so) I’ve really enjoyed it. What I want to know is… Are there further developments for it’s ROM?
Finally, I’ve drawn-up and 3d printed myself a case for mine. Would you mind terribly if I were to throw it up on thing verse or would that upset you?
The firmware used for the DivMMC EnJOY!, ESXDOS, is still being developed.
There are two websites for ESXDOS: http://www.esxdos.org and http://board.esxdos.org.
Although there aren’t many updates there, I know there is still work done, and I’m hoping for a new release soon.
Bellissima!! Come faccio a comprarla e quanto costa?? Scrivimi se mi puoi dare ulteriori notizie ciao
The PlusDlite will be offered on the webshop (check the link on the toolbar just under the ByteDelight logo on this page) very soon, probably this evening!
Il PlusDlite sarà offerto sul webshop (controllare il link sulla barra degli strumenti appena sotto il logo ByteDelight in questa pagina) molto presto, probabilmente questa sera!
Save me one with a case 🙂
Very good type of kit, i’m very happy with it.
Great service and packing
You desserve it Ben, keep up the excelente work you do to the Spectrum community!
And,would it be worth mentioning on this page which of these ULA’s use which work-arounds (dead spider, cockroach, maybe others)? Then we have it all complete on one location 😉
Hmm, good one, but do you know if that information is gathered somewhere already? Otherwise I’ll have to ask others for it as I’ve not worked on that many boards with e.g. the cockroach.
Is it possible to use TR-DOS disks with this interface?
I see from the manual that G+DOS is loaded from the “+SYSTEM.CDE” file on the system disk — could TR-DOS be loaded similarly (provided that TR-DOS exists as a file that could be put on a system disk in the first place)?
No, the PlusDlite doesn’t support TR-DOS files or disks.
The DivMMC EnJOY! SD card interface however does support TR-DOS disk images partially.
Had this for a few days now and I have to say I am impressed. The build quality is outstanding and it actually grips onto my +2a with a nice snug fit the only downside is that there is no case available to give it a bit of protection against the occasional knock when I put my speccy away
This is a fantastic product. never been able to load my favorite programs so quickly. and operation is so easy.
What a sharp picture. never seen such beautiful images from my zx spectrum.
Well made, product, working absolutely perfectly!
Why 2 card slots? What’s the use?
Some developers asked for it, and it was in the original design of the DivMMC interface.
Users who just play games won’t really use the second slot.
Interesting, it seems that documentation for esxDOS is very limited because I would happily look into taking on this challenge myself. I can see why +3 basic wasnt supported especially as the 48k is available to most of them. It’s a little surprising that its took so long for this to come up but …
What about converting a tap file to microdrive, would this be supported natively with the set up? Excuse the question if its dump I’ve only ordered my DivMMC this week and I am still waiting for it hence dont know if anything is available.
The 128 and +3 BASIC ROMs have completely different entrance points for routines compared to the 48 BASIC ROM.
Since there isn’t much memory space for the ESXDOS developers to work with, it’s not easy or maybe simply impossible to add support for these ROMs.
I read that there is a customized 128 BASIC ROM that can be activated with the ESXDOS 0.8.6 RC1 release.
Not sure what the possibilities are with that, probably no +3 floppy disk features.
And that customized ROM won’t be legal to distribute with DivMMC interfaces, so end-user only.
The DivMMC and many other interfaces won’t work with Interface1/Microdrive, PlusD, Disciple, Multiface or other interfaces that have their own ROM.
This is because the DivMMC copies the 48 BASIC ROM into its own RAM and keeps that paged in at all time.
So another interface will not be able to take over.
I am planning for a small interfaced that disables and enables ESXDOS by the push of a button.
That could help with transferring to e.g. Microdrive, but you still need some unwritten software tools to actually transfer.
Without modifications a game in a .TAP archive will not load from Microdrive.
Has almost all the operational components of the multiface it seems. Does this have a hex editor function like the multiface or could this be considered in a later revision?
I’d say reply to the forum with the request, I’m not sure it’s suggested already. David is easy to speak with.
Do you know if this ROM works with your ULA+ addon?
It should be no problem at all, since the ZX-HD just probes if there are video memory changes, which is independent of the ROM inside the ZX Spectrum.
So the ULAplus commands in the SE BASIC ROM should work fine!
I was looking at this to build a PC keyboard interface for the spectrum just like this http://www.benophetinternet.nl/hobby/pcki/index.htm
Would you be able to offer a product like this?
bverstee, thanks a lot for the post.Really thank you! Much obliged.
Ordered this a couple of weeks ago for my +2. I needed it because my speccy had pretty bad buzzing noise on the audio out port. Now I have crystal clear sound and I can enjoy playing my favorite games even more ! My soldering skills are amateur level at best but I’ve managed to solder the kit in under 30 minutes (including opening the speccy, cleaning the board a bit and adding an ear mod as well). Just pay attention to the included instructions and everything will be clear and easy.
Thanks again for a great product,
does the Harlequin 128 fit in this case?
Yes, it will fit.
But if you want to use the RGB output, an extra hole must be drilled in the case.
If you like that I can do that, just let me know when ordering.
I was thinking about putting together something along these lines after seeing an image on Google, but here you are… doing all the hard work for me and at a really nice price.
That’s a really beautiful piece of work ❤️ Would look great beside my Rubik’s Cube lamp 😎
Great to see an option to purchase this in already assembled form. I wonder if the coloured LEDs can be re-oriented so instead of one colour per row, they are more like the spectrum logo, vertically slanted.
I’m working on several alternatives to make that possible (there may even be a programmable one!!).
It will take some time though.
Hi! Will this Kempston / Sinclair Joystick interface work with DivMMC EnJOY! *mini*? Please say that it will work perfectly with my zx spectrum. thank you
Yes, that will work just fine!
This is labelled as working with the DivMMC Enjoy mini. Does it have a through connector or will a splitter rinbbon be needed
Yes, the ZX-HD indeed has a throughput edge connector, sorry that was not clear!
I’ve just updated the description of the ZX-HD with that info.
So the DivMMC EnJOY! *mini* can be connected easily.
Hi sorry, does this works with divMMC Future? Thanks!
Yes, that will work just fine, but of course you better get a PRO ONE – cheaper and with more features!
Will this work with the ZX-HD interface?
Yes, the Kempston/Sinclair joystick interface is compatible with the ZX-HD.
A well-shipped package,
everything neatly packaged separately.
Take the time to solder.
Use good tools.
First look at the video from Bytedelight, then you have an idea of the order of assembly.
I am happy with the result.
Here is the video Jan is referring to: https://www.youtube.com/watch?v=Gar9bZCp1XQ
Will this work with a Gotek style USB drive that emulates a floppy disk drive. I believe they are effectively Shugart interfaces. I am probably going to buy one to work with my BBC just wondering if it would double up.
Yes, as long as it’s configured to DD disk images.
I have 2 Goteks waiting for time to test it myself, but several people have done it already.
Does “DivMMC EnJOY! *mini*” work with Harlequin (48K, 128K)?
Yes, it’s completely compatible!